|
| |
|
Tension
Controllers / Displays
|
|
Total tension Display with
control output
Tension transducers are
connected and averaged in a summing junction box.
DAT
transmitters can be electronically calibrated, Analog or Digital interface.
Din rail or
panel mount transmitters, located up to 500 feet from summing
box.
24 VDC powered, full 16 bit VDC or MA
analog for programmed Tension range.
Digital interfaces include DeviceNet, ProfiBus, Modbus RTU.
Simple menu programming
through keypad or via a free windows software.
|
|
|
Individual side monitoring with control output
DAT-1 and DAT-2 connect to individual transducers on each side of the roll.
3rd MASTER DAT sums the digital signals from DAT-1 and
DAT-2.
MASTER DAT shows
total tension, analog (VDC or MA) or Digital
interface.
(DeviceNet, ProfiBus, Modbus RTU).
DAT-1 and DAT-2 can be
supplied with an analog or digital interface as well.
Simple side to side
monitoring to ensure your process is tracking equal.
|
|
UWT-I-Box 2000 (analog interface to your process)
UWT is 24 VDC
powered and supplies the I-Box 2000 through a 6-wire interface.
I-Box 2000 has
individual A/D
converters for direct transducer conditioning.
UWT provides an output
on total tension, Analog MA or VDC.
Diagnostic display
shows side to side to ensure your process is tracking
equal.
E-Link
3000 (Multiple
Digital
interfaces to your process)
Intelligent
transmitter
with
Individual
A/D's to monitor side to side tension.
Free PC programming software through RS-232 Port-1
Program direct from
master through chosen protocol on Port-2.
DeviceNet, ProfiBus, CANOPEN, Modbus TCP Ethernet,
Modbus RTU - RS-485.
Local and remote diagnostics and fault detection.
Bypass defective cells, automatic recalibration to compensate for
defective cells.
Standard DIN rail
mounting, shown with optional fiberglass NEMA-4 enclosure.
|
|
|
![[Company Logo Image]](Buttons%20common/iws-3.jpg)
Industrial Weighing
Systems
