|
| |
|
Load Tester
New
diagnostic and calibration instrument.
Hand held battery
powered load cell simulator and reader.
Valuable service and
troubleshooting tool for load cell systems up to 4 load cells.
Simple plug
connection, quick connect to our
CEM4-C summing boxes.
Monitors individual
load cells, displays load, % distribution, Mv/V values.
Mv/V calibrator
included, send fixed simulated signals for testing
or calibration. |
 
|
|
Load Cell Mv/V
simulator
Precision simulation of Mv/V
outputs, ABS plastic case, weighs
less than 1 lb
Output
from -0.5 mV/V to 4.5 mV/V in 0.5
Mv/v increments.
Vernier selection (Off, Fine, Medium
or Coarse)with 10 turn
graduated dial.
Ideal tool testing, troubleshooting
and calibrating digital weight
indicators
|
|
|
Retaining Rings
Keep floor
scales in check, sized for all standard feet diameters.
Available in mild or
Stainless steel.
Load cell Spacers
Spacers for shear
beam cells, maintains load cell accuracy specifications.
Mount between cell
and structure to ensure factory recommended loading position.
Ensures adequate gap
for deflection of shear beam. |
|
|
Alignment Assemblies
Flexible
mounts for each end of an "S" cell improves alignment and system
accuracy.
For limited installation
space a single mount can be used, contact IWSystems. |
|
|
Load cell protective covers
Custom made (military
grade rubber) slip on covers for weigh modules.
Keep
out dirt, snow etc.that can interfere with weight transfer
accuracy.
Can be
installed/removed with load cell in place.
BLH Z-Blok
module shown, keeps measuring "Z" section clean. |
 |
|
![[Company Logo Image]](Buttons%20common/iws-3.jpg)
Industrial Weighing
Systems
